A box that didn't explode - Edited

 

I just had to have another go at covering a round box after the first one exploded!

So using another pack of the wonderful Premo Accents in blue with a touch of white I had a fun time covering it.

I used the crochet doily again to texture the lid, and some heart and swirls for the sides.

The I used a shell mould for the lid, and added a pearl but I now see that it could do with a cluster of pearls as it looks a bit odd with just one on the shell - that's easy to fix!

Now that looks better doesn't it - five shells around the pearl.  I am  happy with it now.

The are real shells too - with a touch of shine which I added to them.
Wish I could say the same for the pearl!

I painted inside and out of the box and lid with some cheap acrylic metallic paint to finish it off.

Work in progress - I may be sometime

 Fired up and raring to go with my wonderful box of goodies, I decided to start with one of the projects that Di Keeble kindly photocopied and sent me.  She has written projects for magazines and has been creating with polymer clay for some years.   I bought a gorgeous bracelet from her which I'll blog another day.

As a beginner I think the project I picked was beyond my capabilities at the moment - but it kept me occupied for many hours which is good thing.

 For this project I am using some of the blocks of Premo Sculpey in the previous post.
From the Accents Range, I used Pearl Blue, Bright Green Pearl, Translucent Red and Translucent White.  From the Premo Sculpey range, I used Sunshine, and Cadmium Red Hue.

 Anyone for a game of Ludo - or maybe Tiddleywinks?

I stacked the circles randomly.

I was eager to try out my Extruder for the first time too, so I squashed them a bit to get them to fit in.
 I love these sausages - you just don't know how they are going to turn out!
So far so good.  I was being very careful to read each A4 page and follow every step, and this is where I tripped up!  Unbeknown to me the page I was following was part of a double page spread and as I have bad eyesight I didn't see the 'stage' numbers I followed the pictures step by step, so missed out a crucial part of the instructions and it wasn't until I got to the top of the next page that I realised.
So the first set of sausages were covered, without me knowing that instruction was for after some of those on the next page - which messed the project up somewhat.

 

Luckily I had another half length of  'sausage' which I was able to stack up properly and cover properly and here it is above.

I made the mistake of using two translucent colours in this 'log' - you can see that the translucent white and translucent red have almost disappeared - but that's O.K. as a beginner I am bound to make mistakes - and it's a great learning curve.

This log is supposed to be destined for pillow beads, but the ones I tried doing with the log that turned out oblong instead of square, ended up looking like the ravioli parcels I make for lunch - albeit multi-coloured ones!

I am out tomorrow morning, so this project will have to wait until later in the day and you'll be able to see what happened next!

What a wonderful surprise................

I couldn't believe my eyes when I came back from the 'hard labour' session up my allotment.  My husband handed me two packages.

One contained an order of a few days ago, a large block of white Sculpey, and 6 blocks of the 2oz Premo Sculpey, 2 of which are black as I want to create some tiles inpired by Laurie Mika. 

The next surprise moved me to tears - it was a Fed Ex box from the USA.  And look what was inside!!!

 

In an email conversation with a gentleman from the Polyform Products Company  makers of Sculpey and all the Premo clays and so  much more (you can see the lovely email in my earlier post here.)

he mentioned their Promo Accents range which I hadn't discovered. 

 

He offered to send me a sample - which I accepted.

I looked up the range on the internet.

They were fantastic, and I was so excited trying to guess which colour I would receive.

 

Imagine my astonishment, surprise, and utter delight when I put my hand in the box and pulled out  not one, but 24 packets of the most amazing colours and hues! 

Pearly, glittery, and metallic!

I am absolutely over the moon - I shall be spending a lot of time creating with it in the coming months.

Thank you from the bottom of my heart kind sir, you have made an old lady very very happy and I truly appreciate your very kind and generous gesture.

A Mermaid's Chest - for the Happy Daze Love Challenge

Sometimes it is easy to get carried away with new projects.  There are so many wonderful ones to try!

And often one will laterally lead to another, and so it did today.   After reading the  Happy Daze Design Team Blog.

It has a challenge with the title of  Love - a technique that you love to use.  And here is mine!

I decided that I'd go back to my earlier 'basic' crafting of painting and stamping and getting mucky!

With a little wooden box I bought a year or two ago from Happy Daze

 

Out came, some paints, and silver rub and buff.

 

Inks, embossing powders, blue glitter........

 

And my all time favourite stamp - a Mermaid 

I painted her eyelids with a deeper shade of blue.

Her lips a blue-red colour with a hint of extra shimmer.

Each pearl bead of her necklace I painted individually, together with her shell arm band.

The lid is edged with lots of crushed blue glitter and really glistens in the light - I love it!
And on the outer edges I smoothed on silver and then buffed it until it shines.
The box has been stamped on all sides - vintage shells on a swirly pattern at each end, and larger swirls on the sides.  All the stamping has been embossed with a shiny wet look black embossing powder and softened with a silver rub here and there, and pearlised blue swooshes of rubbed on paint.
I have had such a fun day going to back to basics.

Rubbing on three layers of paints with my fingers, roughing up the wood, swooshing and buffing  of silver rub and buff, stamping, polishing and re-establishing the joy of getting inky, sticky, and messy!

The photos don't really show you how absolutely shimmering wet it looks.

I think I'll keep this little Mermaids Chest for my own little treasures.

Thank you for visiting

Polymer clay play - Sliced pendants

Well moving on from yesterday..................and still snowed in................apologies for the photos, it's a dark day, and even darker in our little bungalow - I used a 'daylight' bulb but still didn't get a good photo - perhaps a photography course should be  next on the list!  The background is white in real life!

 An update on my Julie Piccarello inspired slices

 Now sanded and polished and glazed. 

This one made from all the project scraps is so thick that I need to make a special ring for it!

I enjoyed having a go at this project, and learnt a lot of what not to do as usual.

The original concept was to turn them into pendants but on reflection, these and the other couple I made are destined for keyrings methinks, for the garage, shed, back door, and front door.

Hmmm what shall I play with next?

Update from Polyform Products

I have had the most wonderful emails from their Global Sales and Marketing!

I was thanked for my email and the project list has been updated to include the box.

Not sure if I should mention the gentleman's name - but he wrote me a really nice email, and took the time and trouble to make it personal too.

He obviously did some research and gave me information regarding the Polymer Clay Guilds in the UK, and gave me other information.   He asked if I was aware of Sue Heaser - and gave me some info about her: I replied that I had been on a one day course with her.  He knows her very well too.   He was so very helpful and encouraging, and really kind.  I asked him a couple of questions about what clay to use for a couple of projects I  have in mind and he replied instantly.

I did feel rather guilty that he took the time and trouble and patience to answer my questions - and when I thanked him and said that I was sure that he had far more important things to do than deal with me he wrote:

"There is always something to do but at the end of the day the most important thing is to make sure our customers are happy. Cliché but true. You may not know this but we are not a large cold corporate company. We are a second generation family business that must be good at what we do to sell to the likes of Wal-Mart, etc. but really we’d rather be playing with clay all day."

 

That was such a nice thing to say wasn't it!  It's made my day!

Before my husband retired he was a Global Material Planning and Logistics Manager for a huge worldwide company - so I know how busy he was!

So - a big thank you to Polyform Products Company  makers and suppliers of Premo Sculpey and lots more.

  

Email from Polyform Products Company

Thanks everyone for all your emails and comments on here and forums.

I have just received an email from Polyform Products Company

It made me smile to read the following reply which I have just received from Polyform Products Company (Premo, Sculpey etc)

 

Quote

Dear Lottie,

Thank you for contacting Polyform Products Company and your interest in our products. I am so sorry that this project did not work for you. You are probably right in your assumption of why this did not work for you. Wood as a base for a clay project must be cured before baking. Because it holds moisture and will expand during the baking process (which is what happened with your project) it should be baked at 130°C for 30 minutes to bake out the moisture. After cooling you can proceed with the project as directed and it should be fine.

If there is anything else I can help you with, please contact me again.

Regards,

Technical Assistance

info@polyformproducts.com

Unquote 

What do you think of this reply?  

Are you, like me, of the opinion that the least they could do was to say that they would edit their website project page.   It just needs '1 x round paper mache box' added to the list of requirements - not difficult!  And surely it's the most important part of the project and is not even listed!